Include the following.  Other duties may be assigned.

Ready Mix Driver

• Report to work and be prepared to begin day at scheduled punch in time. Pre-trip inspection of ready mix truck pursuant to D.O.T. regulations.  Pre-trip inspection includes checking fluid levels of engine oil, antifreeze, tire pressure, brakes and other driver operated controls for loading and unloading ready-mix.
• Driver must check with dispatch department upon receipt of first ticket that GPS unit is responsive.
• Upon receipt of delivery ticket, driver pulls truck under or backs truck under plant (depending on plant configuration) and charges mixer to receive concrete, making sure to take any admixtures or other ancillary products that are on ticket.
• Fill water tank before each delivery by placing rubber hose into water tank and filling after checking that all valves are shut.
• UPON BATCH COMPLETION AND PRIOR TO PLANT DEPARTURE, DRIVER IS RESPONSIBLE TO INSURE THAT REAR AREA OF MIXER IS CLEAN AND FREE FROM DEBRIS THAT MAY HAVE ACCUMULATED DURING BATCH PROCESS.
• DRIVER IS RESPONSIBLE TO INSURE THAT PRIOR TO PLANT DEPARTURE, SLUMP MEASUREMENT OF BATCHED CONCRETE IS WITHIN TOLERANCE AND WILL REACH JOBSITE AT INDICATED SLUMP ON TICKET.
• DRIVER IS RESPONSIBLE THAT ALL ADDED CONSTITUENTS AS INDICATED BY TICKET, I.E. – COLOR, FIBER, ADMIXTURE HAS BEEN ADDED TO THE BATCH.
• DRIVER MUST UTLIZE EXPERIENCE AND BEST JUDGEMENT PRIOR TO PLANT DEPARTURE THAT CONCRETE HAS BEEN BATCHED CORRECTLY ACCORDING TO TICKET SPECIFICATIONS.  (TOO SANDY, DRY, ROCKY, CEMENT RICH, ETC.)
• Uses map book and experience to travel in most direct route to job site to ensure on time delivery.
• Safely drive truck to jobsite and arrive with the desired slump within customer or job specifications.
• Upon arriving to jobsite, driver must get out of their truck and review their surroundings for potential obstacles (sand, nails, rebar, etc.)  Once sight is secure, safely maneuver truck to designated unloading area.
• Pursuant to customer needs, driver will place chutes from fender or hanging rack onto the main chute at the rear of truck for discharge.  Upon completion of discharge, driver will wash the chutes and put back on truck.
• Prior to leaving jobsite, driver is responsible for completing all paperwork and collection of payment if necessary.
• Upon completion of deliveries for the day, driver will wash truck with hose and brush, including the use of soap solution when necessary.
• Communicate with dispatch through two-way radio and GPS text unit.
• At the end of shift, all paperwork must be completed and turned in.
• Ready mix driver is responsible to call automated driver schedule each day for start time.
• Each driver will perform a post-trip inspection of truck pursuant to DOT regulations.  Driver is responsible for maintaining all logs for assigned truck.
• Other duties or special projects as assigned by management.

Dump Truck Driver

• Responsible for HQI and Sandpit material movement to MTI concrete plants in order to ensure production requirements are met.
• Pre-trip inspection of dump truck pursuant to D.O.T. regulations.  Pre-trip inspection includes checking fluid levels of engine oil, antifreeze, tire pressure, brakes and other driver operated controls for loading and unloading aggregate material.
• Driver must check with dispatch department upon receipt of first ticket that GPS unit is responsive.
• Upon receiving delivery ticket, driver loads truck on scale (depending on plant configuration) and weighs dump truck to measure aggregate material.
• Uses map book and experience and takes most direct route to job site to ensure on time delivery.
• Safely drives truck to jobsite and arrives with the desired aggregate material within customer or job specifications.
• Upon arriving to jobsite, driver must get out of their truck and review their surroundings for potential obstacles (sand, nails, rebar, etc.)  Once sight is secure, safely maneuver truck to designated unloading area.
• Prior to leaving jobsite, driver is responsible for completing all paperwork and collection of payment if necessary.
• Weekly, driver will wash truck with hose and brush, including the use of soap solution when necessary.
• Communicate with dispatch through two-way radio and GPS text unit.
• At the end of the shift, all paperwork must be completed and turned in.
• Dump truck driver is responsible to call automated driver schedule each day for start time.
• Each driver is expected to perform a post-trip inspection of truck pursuant to DOT regulations. Driver is responsible for maintaining and recording fuel level in assigned truck.
• Other duties or special projects as assigned by management.

Bulker Driver

• Responsible for movement of cement and fly ash to MTI concrete plants in order to ensure production requirements are met.  
• Pre-trip inspection of dump truck pursuant to D.O.T. regulations.  Pre-trip inspection includes checking fluid levels of engine oil, antifreeze, tire pressure, brakes and other driver operated controls for loading and unloading cement and fly ash material.
• Driver loads truck on scale (depending on plant configuration) and weighs truck and bulker trailer to measure cement and fly ash material.
• Safely drives truck to pickup site and arrives with the desired cement and fly ash material within MTI job specifications.
• Upon arriving at MTI plant, the driver must be able to safely maneuver truck.
• Responsible for safe and correct offloading of materials into batch plants.
• Bi-weekly, driver will wash truck with hose and brush, including the use of soap solution when necessary.
• Communicate with dispatch through two-way radio and GPS text unit.
• At the end of the shift, all paperwork must be completed and turned in.
• Bulker truck driver is responsible to call automated driver schedule each day for start time.
• Each driver is expected to perform a post-trip inspection of truck pursuant to DOT regulations. Driver is responsible for maintaining and recording fuel level in assigned truck.
• Other duties or special projects as assigned by management.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit.  The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms.  The employee is occasionally required to stand; walk; climb or balance; stoop, kneel, crouch or crawl; and talk or hear.  The employee must occasionally lift and/or move up to 100 pounds.  Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, toxic or caustic chemicals, outside weather conditions and vibration.  The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; extreme heat; and risk of electrical shock.  The noise level in the work environment is moderate to loud.

All employees are expected to perform their duties in the most efficient and cautious manner in order to ensure safety of themselves and others at all times.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

1.  Ability to pass Federal Department of Transportation drug screen and physical.
2. Maintain driving record in accordance with Federal and State Motor Carrier regulations, and meet company policy requirements.
3. Must be able to take orders, instruction and guidance from management and supervisors.
4. Ability to handle cash and make change.
5. Ability to deal with customers and other employees in a diplomatic manner, in a variety of stressful situations.
6. Must safely operate truck and perform tasks that are congruent with company policy, and within state and federal laws.
7. Maintain Department of Transportation Health conditions.

EDUCATION AND/OR EXPERIENCE

High school diploma or GED required. 3 years related experience and/or training; or equivalent combination of education and experience.

MATHEMATICAL SKILLS

Ability to perform simple math equations.

LANGUAGE SKILLS

Must be able to read, write and speak English and Spanish.

REASONING ABILITY

Ability to apply common sense under standing to carry out detailed written or oral instructions.  

CERTIFICATES, LICENSES, REGISTRATIONS

Valid Department of Transportation Certified Commercial Drivers License / Class C minimum.